Weaving method of bracelet rope

1. Prepare two lines, with the red line as the center line and the orange line winding 1 turn above the center line. Note: First of all, we hold the coil in our left hand and the center line in our right hand. 2. Tighten the two lines, and the orange line will wrap around 1 circle above the center line. 3. Tighten the two wires, thus completing the 1 right diagonal knot. The second paragraph: the production process of continuous oblique knot: 1. Prepare two lines, then put them in a cross shape, with the red line as the center line and the orange line winding 1 turn on the center line. 2. Tighten both ends of the yellow wire, and turn 1 turn on the right side of the circle formed in step 1 with the lower end of the yellow wire. 3. Tighten both ends of the yellow line, thus forming a 1 oblique knot. 4. Add 1 below the red line, and put the yellow line below the second red line. 5. The yellow line takes the second red line as the center line and weaves a diagonal knot on this center line. 6. Tighten the yellow line and adjust the knot.