How to take off the strap

To remove the steel strip, please prepare the removal tool. Look at the arrow on the strap first, put the watch flat on the tool, press the thimble on the round mouth, and push it outward in the direction of the cutting head, and the clasp will come out. When removing the holster, align the round end of the tool with the ear hole, insert and squeeze it, and pull the holster outward and pull it out at the same time, thus completing the removal.

1, steel strap

To remove the rigid belt, you need to prepare a belt removal tool. First look at the arrow on the strap and take it off in the direction of the arrow. Smooth the watchband, put it on the tool, use the thimble to find the position of the pin along the arrow, press it on the round mouth, push it out in the direction of the arrow, and take out the buckle with a little force.

If the steel strap purchased directly at the counter can be adjusted to the appropriate length by the staff on the spot, online shopping needs to be disassembled by itself, and you can seek the help of professionals. The letters and symbols on the removed steel belt are consistent with the dial, otherwise they are upside down and need to be removed again.

2, leather strap

To take off the leather strap, you need to prepare tools such as soft cloth and ear fork. First, break the watch band, observe the lever on the ear, align the round end of the tool with the hole of the ear on the side of the dial, insert the tool into the hole, squeeze the ear, and pull the watch band outward and out at the same time, thus completing the disassembly.

When removing the leather strap, be careful not to scratch the case with tools to avoid damaging the strap and affecting the appearance. When disassembling, the position of the strap should not be wrong. Always wipe after disassembly and pay attention to maintenance.