Women's square toe hook-up video

Ladies' Square Shoes Hooking Video: Web Link.

Hooking courses for women's sports shoes are as follows:

1. Start sewing from the sole, press the needle on the shoe, hook two stitches with one stitch, hook three stitches at the corner and where there are long stitches, and hook a short stitch.

2. Hook your heels. ?

Make a mark at a quarter of the sole length of the heel part. Hook the short needle from the left side of the mark, hook the front side from the left side of the mark and hook the second line from right to left.

There is one line before and after, a total of ten lines. The front two stitches and the back two stitches should be stitched together, and the method of stitching (two stitches for side stitching and two holes, a total of three stitches are locked into one stitch. )

3. Hook the toe part.

The toe of the sole is in the middle, with one stitch in the middle and eight stitches on both sides, making a total of seventeen stitches. Hook from toe left, short needle hook back and forth, left (front) hook right, right hook left. (one line), a total of six lines.

Start the front hook, hook a short needle and a pull needle (two needles) on the sole. On the reverse side, start from the right hook, pick the needle of the second hole, and finally hook a short guide needle on the sole. On the front, pick a needle in the second hole. (This will not enlarge the upper, but the last stitch will hook a stitch.

4. After six rows of short needles are hooked, start to hook the net. After the last row of six rows of front hooks, hook from the reverse side (right side), turn to the reverse side after pulling out the needle, hook a short needle and a three-needle discriminator in the second hole, hook a short needle and a three-needle discriminator every three holes, and hook a short needle and a three-needle discriminator in the fourth hole.

The fourth hole is hooked with a short needle and a circulating hook. When you hook the seventh needle, you also hook the penultimate hole, so there are eight three needles. After hooking, at the end of the reverse side of the sole, count two holes (that is, two short needles) and hook one pull needle (two for each).

Start from the front, turn to the front after pulling, hook a sub-needle, and then hook short needles in eight three-needle sub-needles, and hook four short needles in each three-needle sub-needle.

At the front end, there are also two holes in the sole, and a guide pin is hooked in the third hole. Starting from the reverse side, hook three stitches, and hook a short stitch among the four short stitches on the upper row of three stitches in a circle. The front side is the same as the upper row. Three root needles and four short needles are arranged in a row, a total of eight rows. ?

5. the mesh on the shallow mouth.

There are seven rows of hooks, just like the mesh on the instep. The difference is that the short needle of the three-needle minute hand starting from the reverse side should be hooked in the center of the two three-needle minute hands, and the ends are the same, so that the shoe mouth will become smaller and smaller and reach the right shoe mouth. The shoes are all ready.