Mini World Antique Architecture Course

1. First, find a suitable location and enclose a 46X46 area with Shi Zhuan (or any square). Take water buildings as an example here, because strange things are easy to encounter on land and the terrain is irregular.

2. In the place originally surrounded by Shi Zhuan, raise a square outward and enclose it with grass squares.

3. Then, raise the red clay by 7 squares, so that the whole is an 8-square column.

4. Invert an oak staircase at the top of each stained clay. Notice that there are two colored clay on the side.

5. Next, deal with the middle area of the four faces, as shown in the figure: the timely block is placed in the black area, the timely half brick is placed in the green area, and the timely stairs are placed upside down in the red area.

6. The two pillars in the middle area are Shi Zhuan half bricks downward, and the spacing between them is half a grid.

7. The next step is to start building the roof. First, put a circle of Shi Zhuan on the trap door one grid away from the time, and then put a circle of Shi Zhuan half brick on the periphery of Shi Zhuan.

8, and then in Shi Zhuan, in turn, increasing half a brick, total * * * accumulated 6 layers.

9. Connect each column with two-grid-high timely building blocks. Include a middle area. Install a trap door in the highest block. Be careful not to put the trap door on the red soil.

10, starting from Shi Zhuan, add half a brick in turn, and stop after accumulating to 12 layer.

1 1. put a cap on the 12 building and put the "kissing beast" on the roof. Use half brick, 3 squares, 2 squares and 1 squares in turn, and place four corners, as shown in the figure.

12. After the above operations, the palace in my world was built, as shown in the following figure: