Mid-autumn rabbit lantern manual daquan

Materials: waste fruit protection net, disposable plastic cup, glue, torsion bar, scissors, waste lantern pole, plastic toy eye.

Steps:

1, prepare all materials.

2. Cut rabbit ears with a fruit net. It's best to cut the white outer ear a little bigger.

3. Cut out a smaller part of the inner ear with a smaller pink protective net, as shown in the figure.

4. As shown in the figure, drill three holes in the bottom of the disposable plastic cup.

5. Put a fruit net on the drilled disposable plastic cup.

6. As shown in the figure, roll in the excess.

7. Make a beard with a torsion bar. Here, the torsion bar can be screwed together with three long torsion bars in the middle and fixed on the net sleeve.

8. Fix your nose and mouth with a twist stick and stick your eyes in the right place. If you don't have an eye as shown in the picture, you can also cut an eye with black paper and paste it.

9. Paste and fix the four previously cut rabbit ears respectively, as shown in the figure.

10. Fix the ears on both sides above the cup.

1 1.

12, adjust the rabbit and fix the light bulb, and an environmentally friendly rabbit lamp will be ready.