How to remove the seat cover of Chang 'an Star 2?

1. Locate the two screws on the rear seat cushion.

2. Remove these two screws with12mm socket tool.

3. Cushion and floor are fixed together with buckles. After unscrewing the screws, lift up the seat cushion to separate it.

4. Wrap the seat cover and stuff the back of the seat cushion under the backrest. Pay attention to ensure that the seat belt buckle is correctly pulled out and fixed on the seat cushion.

5. Ensure that the seat back is in the correct position, and press hard to insert the two buckles into the corresponding grooves.

6. Reinstall the two loose fastening travel limiters.