How to change the strap of Omega watch? Is there any place to change in Guangzhou?

First of all, please read the arrow on the back of the strap carefully before you prepare to disassemble it. The belt particles with arrows are detachable. Secondly, loosen the handle of the strap detacher, put the strap into the watch slot, keep the steel needle of the strap detacher aligned with the pinhole, and the steel needle of the strap detacher follows the direction indicated by the arrow. At this time, twist the handle of the strap remover inward, and the steel needle (raw ear) connected with the strap will pop up, and then pull out the raw ear with pliers.

During use, pay attention to the use of steel needles to avoid scratching the strap, which will have a certain impact on the appearance, and be careful not to scratch your hands. After the strap is disassembled to a size suitable for the wrist, it is necessary to connect the strap that has been broken into two sections. After insertion, you can gently pat the rest of the strap with a hard object, preferably a colloidal hard object, so as to better avoid scratching the strap. After knocking in, gently push the raw ear into the groove with a tape remover and fix the raw ear.

If you have any questions about watch maintenance, watch maintenance and other watches, please feel free to consult the above telephone. In addition, we can also provide you with accessories replacement and watch appraisal services. We have a professional maintenance master to give you a comprehensive answer! ! !

(of leather) there must be tools to change the strap. One end of this strap removal tool is concave for removing ears, and the other end is pointed for cleaning strap holes. If not, you can use a flat or small tool instead.

There is a metal rod-shaped object on the belt of the watch, which is called raw ear. There are two springs at both ends of the raw ear, which are used to clamp the watch ear. So when we remove the strap, we just need to use the concave head of the tool, grab one end of the ear and press it down. The spring is compressed and the length of the raw ear becomes shorter. So you can take the tape off.

When installing a new watch band, first press one end of the raw ear with a tool, and the other end will be stuck into the groove of the watch ear. Align the pressed raw ear with the groove on the other side, and gently retract the tool so that the raw ear is stuck in the groove of the watch ear. You can complete the replacement of the strap!