Homemade rubber stamp course

The tutorial of self-made rubber stamp is as follows:

Trace the material to be carved with sulfuric acid paper, put the painted side of sulfuric acid paper on the rubber stamp, and rub the back of sulfuric acid paper with rubber until the painting is printed. Cut the rubber brick to be carved into almost the same size, carve the outer circle, and leave the outer space for carving. Leave a blank when carving. Carve the head first and carve it bit by bit. Carve the foot on it again, and it will be carved up bit by bit. When the carving is finished, it depends on the printed effect.

Rubber seal is a kind of leisure hand-made form, which uses small carving tools to carve or carve the special rubber brick for carving, thus making patterns that can be stamped repeatedly. Because of the material, the carving time of hand-carved rubber seal is much shorter than that of stone carving and wood carving, and it doesn't need complicated skills, so almost everyone can get started easily, and the performance content of the seal is also very arbitrary.

Maintenance method of rubber stamp

1, don't use plastic containers, it will melt and stick to each other, resulting in the loss of chapter content. But you can use wooden cases, cartons, etc. Be careful not to put it in direct sunlight.

2. Rubber seals with different textures must be stored separately to avoid chemical reaction with each other. If stacking is needed, rubber stamps should be separated by paper or cloth, and thicker and harder cardboard is better.

3. If you have the ability, you can use thick kraft paper/parchment to make paper bags or cartons, which can better preserve rubber stamps. It should be noted that several rubber sealing rings cannot be put together, otherwise they will melt and cause adhesion.

4. If you need to imprint different colors of inkpad frequently, it is best to clean it with cleaning agent frequently to avoid mixed color.