Shoe strap process

The shoelace threading tutorial is as follows:

First, the shoelaces are inserted from the inside of the shoes, and the two holes in the middle of the front end are inserted, and the lengths of the two sides are the same; The tip of the shoelace passes through the shoe hole in the lower right corner, then goes out from the left and then enters the shoe hole in the upper right corner; The shoelaces on the other side do the same; Then from the inside out, from the upper down the shoe hole; Go to the shoe hole in the opposite upper and go out from the lower left to form a winding buckle;

Wind this shoelace several times and then wear it out to form a spiral knot; Do the same with the shoelaces on the other side, and the coconut shoes will be tied. First, the shoelaces are inserted from the inside of the shoes, and the two holes in the middle of the front end are inserted, and the lengths of the two sides are the same; The tip of the shoelace passes through the shoe hole in the lower right corner, then goes out from the left and then enters the shoe hole in the upper right corner;

The back four shoe holes are also operated in this way, and then the shoelaces are passed through the cross and then wound several times to form a spiral knot; The left and right operations are the same, tying coconut shoelaces. First, the shoelace passes through two holes on the inner side of the front end and is pulled out to adjust the distance; Then, the shoelaces respectively pass through the parallel outer holes from the inner side, and the shoelaces pass through and cross from the middle;

Then repeat the previous steps; Insert the inner hole, pull out the outer hole, and then cross the two shoelaces from the middle and stack them together, with the two sides winding round and round, and the shoelace tips are fixed through the middle.