How to change the chain length of Omega watch?

1. Turn the handle of the watch detacher. Unscrew it and put the thimble back on the flat edge!

2. Align the small pins between the watchbands to be disassembled, screw on the handle of the watch detacher and eject the small pins.

3. Put the watch band into the "groove" of the watch remover (the steel bolt with clamping needle has two ends, one is flat, the other is grooved and the other is stuck, so the sharp needle should be pushed in from the flat end, not from the straight end).

4, according to the size of the wrist to adjust the appropriate length, and then press the arrow in the opposite direction to put the watch hand back, install the strap, but pay attention to the strap must first make sure that the strap is not made of gongs, but filled with nails or hairpins. You can go from small mouth to big mouth, which is OK! No matter how difficult it is to remove the strap, it will be done in less than a minute!

Matters needing attention

The thimble of the watch adjuster must be aligned with the pin of the strap, otherwise the watch adjuster will be damaged.

Do not screw the knob of the instrument regulator into it, otherwise the instrument regulator may be scrapped.