How to take off the strap

The steps to remove the strap are as follows: 1. Simple strap removal: 1. Get your tools and watches ready. 2. Open the strap and observe the pull rod on the ear. 3. Align the round end of the tool with the ear hole on the side of the dial. 4. Insert the hole, squeeze the raw ear with a tool, and pull the belt outward at the same time. 5. Pull out the belt to complete the disassembly. Second, remove the solid strap: 1, prepare tools, please read the arrow on the back of the strap before removing it. 2. The belt with arrow is detachable. 3. Loosen the handle of the strap detacher, put the strap into the watch slot, keep the steel needle of the strap detacher aligned with the pinhole, and the steel needle of the strap detacher follows the direction indicated by the arrow. At this time, twist the handle of the strap remover inward, and the steel needle (raw ear) connected with the strap will pop up, and then pull out the raw ear with pliers. 4. During use, use the steel needle carefully to avoid scratching the strap, which will have a certain impact on the appearance. 5. After the strap is disassembled into a size suitable for the wrist, it is necessary to connect the strap that has been broken into two sections. 6. After the raw ear is inserted and fixed, the remaining big joint can be lightly patted with a hard object, preferably a gelatinous hard object, which can better avoid scratching the strap. After knocking in, gently push the raw ear into the groove with a tape remover.