How to remove the toilet video tutorial

The video tutorial of toilet disassembly is as follows:

Preparation tools: screwdriver, wallpaper, knife, gloves, towels, etc.

1, first check whether there are cracks on the old toilet. Please pay special attention to the place where you want to start lifting the toilet. Because the toilet is made of ceramics, it will cut people like glass, so you should bring thick work gloves when moving the toilet.

2. Pick up the water tank cover-take off the water tank cover and take the cover where it won't touch.

3. Turn off the water. The position of the water valve is on the left side of the toilet.

4. Wash the water in the water tank, press and hold the flush handle to let the water flow away completely, put on rubber gloves and dry the water in the water tank with a sponge or towel.

Scoop out the remaining water in the toilet with a small disposable container. Dry the remaining water in the toilet with a sponge or towel.

6. Remove the connected water pipe from the toilet and pour the excess water into the bucket.

7. Connect the water tank to the toilet seat. Do not remove the bolts. Sometimes it takes hours to remove the water tank from the toilet seat.

8. Remove the nuts and bolts for fixing. Sometimes bolts turn, so they should be sawed off with a hacksaw. You can buy a single-handle saw, which is very convenient to use in a narrow working area.

9. If your toilet seat is glued to the floor by caulking, please cut off the sealant with a tool knife.

10, gently shake the toilet and loosen the toilet from the adhesive.

1 1. Ask another person to help lift the toilet. At this time, please keep your back straight and support your weight with your legs. Put the removed old toilet in a place that won't interfere with work, and put a rag or towel on it, because it will be a little dirty. Otherwise, you can put it on a rag or plastic sheet and drag it away.

12. Plug the drain pipe with rags to prevent the gas from flowing out of the sewer.

13. If the fixing bolt is broken, it should be removed and replaced.

14. Scrape off the old sealant on the flange and floor with a putty knife.