How to make a cotton doll's bed

The practice of cotton doll bed is divided into seven steps:

Materials: wood board, batten, saw blade, grinding bar, alcohol glue.

1. Glue the board with alcohol. The size of the board depends on the size of the doll.

2. If you are making bunk beds, remember to post two and let them dry.

3. Take 9 pieces of wood as long as the bed board, mark it if it is too long, and then saw it off; Saw too long wood strips to the same width and length as the bed board; After sawing, smooth the uneven part of the wood bar on the grinding bar.

4. After grinding, it can be connected. You can leave 0.7 on the top and 3.5 in the middle. This can be decided according to the size of the bed you want.

5, take disposable chopsticks, take the round part of chopsticks, each section is 3.5 cm, three sections are one, a total of four are needed, and then make four chopsticks with the same length. If they are uneven, grind them flat on a grinding rod.

6. Then it can be glued with alcohol; Stand up and stick it in. When it is dry, put the disposable chopsticks in it. Then stick a piece of wood on the bottom; The bed board needs to be glued on three sides.

7. Next, make a ladder, the length of which is from the fence above to the bed board below; Then stick it with about 5 cm of wood; Glue it all on, and the doll bed will be finished.