How to draw an Iron Man by hand?

Draw a long and curved horizontal line above the eyes of the mini iron man panel. Now draw Iron Man's eyes. First, draw four short vertical lines directly below the long horizontal line. Now add a short horizontal line to the bottom of the eye. The eyes should look like small rectangles. Draw a long vertical line on both sides of the horizontal line to increase the top of the iron man panel in Chibi. Add two shorter horizontal lines at the top, but leave more space in the middle. Draw two vertical lines and a horizontal line at the gap. Now, draw a short diagonal line next to each eye, and then add the bottom of the Iron Man panel. Now draw a long curved diagonal on both sides. These lines should point to the inside of the bottom. Draw a short diagonal line on both sides and a horizontal line in the middle to narrow the distance. Now, add the header by drawing four small tags on the panel. Draw a line on the top and bottom. Pay close attention to the distance from the line to the panel. Now connect these short lines with a series of curves to complete the shape of the head. When drawing the head shape, please put the lines close to the panel. Don't draw too far. Iron man's head will tilt slightly downward, so the top is wider than the bottom. Add more lines to the head to get extra details of the helmet. If you just want a fast mini Iron Man helmet, you can actually stop here. Draw a small wide circle for the palm of your hand on the lower right side of your head. Don't put the circle near the head of the iron man in Chibi. Their edges should not touch. At the top of the small circle, draw three short arcs for Iron Man's fingers. On the left, draw a short arc for your thumb. Draw a small circle in the middle of the palm to bounce and explode. Add a curve up and down the other arms and shoulders of Iron Man. Under the head, draw a circle on the arc reactor on the chest of mini iron man. Do not drag the reactor directly under the middle of the head. Draw slightly to the left. Use several curves to add shoulder pads on both sides of the head. Draw a small square under the chest and pass through the middle of Iron Man's torso armor.