Various knitting methods of bracelets

The bracelet knitting method tutorial is as follows:

Preparation materials: rope, scissors.

1, tie the rope in a knot.

2. The other rope bends from the middle, passes through the first knot and is tightened.

3. Then thread the knotted rope out as follows.

4, and tighten.

5. Go around the left rope from above, then go around the right rope from above and go out from below.

6. Then tighten.

7. Thread the rope on the right side through the left side in the same way as above.

8. Tighten at a certain arrangement interval and repeat the above operation.

9. Tie it to a certain length and cut off the extra two.

10, circle two small circles first, and then make a cross according to the following steps.

1 1. Go through the rope on the right from the middle below. ?

12, pull into a small ball.

13, cut off the extra parts, and the beautiful bracelet will be woven successfully.

The following are recommended routes:

1, crystal elastic thread, also known as fishing elastic thread, is mainly used to make bracelets, usually strung together. Therefore, to choose a thicker one, it is suggested that the string and double strand are stronger. If the bead hole is small, you can only choose the right one. Generally speaking, 0.5MM-0.8MM is used, and the bead hole size is relatively large, so 0.8- 1MM can be selected. Like nuclear carvings and peach stone bracelets, they are generally crystal elastic ropes.

2. Multi-strand glass fiber elastic thread is composed of thin elastic thread. The advantage is that the rope won't break at once. Usually two strands are worn together. The disadvantage is that it is not wearable. Glass fiber elastic threads such as king kong and walnut are not suitable for use and are easy to wear off. Suitable for crystal and stone bracelets.

3. The rope is made of polyester, which can be used to thread beads and braid ropes. This rope is also used for 108 beads and bracelets. It is characterized by various colors and styles.