Simple pen container manufacturing method

The manufacturing method of the simple pen container is as follows:

Material preparation: drum tissue core, scissors, cardboard, dye and brush.

The method is as follows:

1. Put the prepared paper towel cores together, apply glue to one side of the paper towel core, stick another paper towel core, and then apply glue to stick the next paper towel core until all four paper towel cores are stuck together.

2. Cut the cardboard into a suitable size, and apply glue to the bottom of the four paper towel core tubes that have been glued, and also apply glue to the top of the cardboard to glue the paper towel core tubes to it.

3. Take out two more tissue tubes from the middle part and cut them off. Then, four semi-tissue tubes were glued together using the method of step 2.

4. After the four and a half paper towel cores are bonded, they are bonded to the cardboard by the method in step 3.

5. After the combined pen container is finished, draw your favorite figure on the surface with a brush, and then dry it naturally, and you can use it.