12 hole how to tie your shoelaces is the most beautiful?

1. Take two simple steps and tie a bow on your shoes.

2. Shoelaces can be tied so happily.

3. Tie a beautiful shoelace so that a pair of shoes can have various faces.

4. Seven cool ways to tie your shoelaces

4. 1 kink

1. Two shoelaces are tied inside and put outside.

2. The two shoelaces are crossed and pulled from the inside out.

3. Every joint should be in the center of the shoe, and it is better to tighten it.

4, forming a knot in the middle is also a nice tie.

5, finally tied into an X-shaped, easy to put on and take off.

6. Put the remaining shoelaces in the shoes and tie them together.

4.2 Double straight knot

1. Leave the shoelaces inside for a certain length (to tie the white shoelaces) and then pull them out.

2. The shoelaces are repeated according to the zigzag system method of pressing in and out, forming a "one-word" state.

3. Pay attention to the red dotted line standard threading instructions.

4. Hide the remaining shoelaces in your shoes.

5, start wearing the second shoelace, remember to choose a slightly narrower operation and fix it in the shoe according to the previous practice.

6. Repeat the zigzag system method of pressing in and pressing out to form a "one-word" state, paying attention to the fact that the second root is always above the first one.

7. The color contrast of the two shoelaces is the first.

8. Hide the remaining shoelaces in your shoes and fix them.

4.3 Trapezoidal knot

1, put an "I" on the inside of the shoelace.

2. The two ends respectively pass through the shoe hole of the upper, and do not tighten to leave a certain distance.

3. The shoelaces are crossed at both ends, respectively inserted into the reserved areas opposite, and tied tightly.

Be patient and see if it's the same.

5. It is about to be completed, remember to leave the last hole.

6. Adjust the tightness and press the shoelaces in the same direction.

7. Hide the remaining shoelaces in your shoes.

4.4 internal x junction

1, put on the outer I-shaped shoelaces, 1 in and out.

2. It is suggested that the length of shoelaces should be above 90cm.

3. The remaining shoelaces are knotted internally.

4.5 diagonal knot

1. Tie a knot in the first hole on the right and pull it out.

2. Insert obliquely from the second hole on the left and pull inward from the third hole on the left.

3. Oblique through the second hole on the right.

It's better to look more relaxed in this legal system.

4.6 double x junction

1, leave a hole, and go through from outside to inside according to 1 to 2.

2. Wear white shoelaces according to the cross method.

3. Tie the white shoelaces and prepare the blue shoelaces.

4. Put on the remaining shoelaces from the outside to the inside.

5. Thread the blue ribbon into the first shoe hole, then through the white shoelace and into the next shoe hole.

6. The blue ribbon also passes through the remaining holes from outside to inside.

7. The remaining blue ribbon shall be wound.

8. Put the tail of the blue ribbon into the ferrule made before and tighten it.

4.7 Cross knot

1. Fix shoelaces in shoes from 1 to 2 to 3.

2. Repeat the previous steps from 1 to 2.

3. Check whether there is a "cross" knot except the first hole.

4. Starting from the other side, fix the shoelaces first, or go in from 1 to 2 and 3.

5. Pay attention to the fact that the cross knot of the new shoelace system does not coincide with the previous one, which is only a supplement to the previous one.

6. Finally, remember to hide the remaining shoelaces in your shoes.